20 results
A valid WAN IP address does not always mean Internet access works after setup. Verify the modem connection, then try manual DNS, the specified power-cycle procedure, and finally a reset and manual setup.
Weak Wi-Fi can result from obstacles, interference, antenna positioning or channel conflicts. Work through router placement and channel settings first, then consider a range extender, Deco Mesh system or powerline adapters for remaining coverage gaps.
Compare Mesh WiFi, range extenders and powerline adapters to find a suitable way to improve indoor or outdoor coverage. The guide explains placement, electrical-circuit requirements and the features of recommended TP-Link options.
WiFi 7’s ultra-wide 320 MHz channels increase transmission capacity and use the less congested 6 GHz band. Their benefits may matter most for emerging demanding applications, while earlier WiFi generations can still meet many everyday needs.
Before buying a mesh router or extender, try improving your router's position. These six tips cover location, height, interference, obstacles, device safety, and antenna angles.
A central, raised, unobstructed router position can often solve weak Wi-Fi without new hardware. Learn six placement principles, how to cover two floors, and when a mesh system, extender, or newer router may be needed.
Homedale provides Wi-Fi monitoring details beyond the built-in Windows 11/10 signal monitor. Its tabs cover adapter information, nearby access points, signal graphs, channel usage, and location.
If other devices connect to your TP-Link Wi-Fi but one cannot, the problem may lie with that device or its settings. Work through these five checks, from testing another network to power cycling the equipment.
Wi-Fi 7's smart-home advantages center on connection reliability and capacity rather than download speed alone. Its multi-band operation and increased headroom can help busy IoT networks, while smaller, stable Wi-Fi 6 setups may not need an upgrade.
Share a USB printer among computers connected to your router using TP-Link USB Printer Controller. The setup requires printer drivers and the utility on every computer that will print.
Windows 11's Wi-Fi bars provide only a rough indication of reception. These free tools and a built-in command offer more detailed readings to help compare locations and troubleshoot weak connections.
Use Command Prompt in Windows 11/10 to inspect your laptop’s supported Wi-Fi radio types and identify its band support. The guide also compares the bands and explains where to check the adapter’s status and preferred band.
MAC filtering for devices behind a Range Extender depends on whether the extender uses Proxy, Universal, or WDS mode. This guide explains which MAC addresses to enter on a Green UI router and how to identify them.
If your Mac joins a TP-Link wireless network but cannot reach the internet, check DHCP, the router’s WAN connection, and DNS settings in that order. These steps help distinguish an address assignment problem from a line or DNS issue.
Windows 11 can display a no-internet warning even when websites still work. Start with connection resets and updates, then check IPv6, connectivity-probe registry entries, and system files if the warning persists.
Prepare your test environment, compare wired and wireless performance, and check router settings to investigate slow TP-Link speeds. The procedure covers interference, connection rates, packet capture, and WAN configuration.
If Windows connects to your TP-Link wireless network but cannot reach the Internet, check automatic addressing, the router's WAN status, and DNS. Follow the checks in order, then reboot and contact support if needed.
An ISP may block Deco if it expects a previously registered computer or router MAC address. These procedures explain how to clone that address manually or select an old router through the Deco app, using Deco M5 as the example.
A DNS error can prevent websites from loading even when your Internet connection works. Follow these fixes in order, from restarting your equipment and clearing cached lookups to changing DNS servers and checking drivers.
Repeated Wi-Fi drops can originate with your internet provider, router, or device. These checks cover restarts, outages, network load, firmware, Windows troubleshooting, range, and interference.
